Flip - A Linux Development Board based on Allwinner F1C200s

Project Repository: linyuxuanlin/Flip

Online Project Preview:

The F1C100s/F1C200s are based on the ARM9 CPU architecture and have identical packaging. The only difference is that the F1C100S comes with 32MB DDR1 memory, while the F1C200S has 64MB.

In addition, this chip integrates various common peripherals such as USB OTG, UART, SPI, TWI, TP, SD/MMC, and CSI.

Basic Specifications

Here are the basic specifications of the F1C200s:

ARM9 CPU architecture running at 400M
64MB DDR1 Memory SIP
SD2.0 and eMMC 4.41 support
Video capabilities include H.264/MPEG1 decoding at 1920x1080@30fps, and MJPEG encoding at 1280x720@30fps
Audio support with 2xDAC and 1xADC, DAC up to 192kHz, and ADC up to 48kHz
1 x I2S/PCM interface
RGB display interface supporting up to 1280x720@60fps
TV CVBS output with support for NTSC/PAL
USB OTG
SDIO
IR
3 x TWI (Two-Wire Interface)
2 x SPI
3 x UART
Operating system options include Melis or Linux SDK OS
Package: QFN88, 10mm x 10mm

System architecture diagram of the F1C200s:

Typical application schematic:

Pin definitions:

References and Acknowledgments

Original: https://wiki-power.com/ This post is protected by CC BY-NC-SA 4.0 agreement, should be reproduced with attribution.

Design of Each Module

This post is translated using ChatGPT, please feedback if any omissions.